iStick Pico 25 with ELLO
Product Introduction:
The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.
Product Introduction:
The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.
Parameter:
Size: 25.0mm*48.0mm*104.0mm
Weight: 143.2g
E-liquid capacity: 2ml
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)
Weight: 143.2g
E-liquid capacity: 2ml
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)
Standard configuration:
| 1×iStick Pico 25 (without battery) 1×ELLO Atomizer | |
| 1×HW1 Single-Cylinder 0.2ohm Head 1×HW2 Dual-Cylinder 0.3ohm Head | |
| 1×QC USB Cable 2×User Manuals Spare Parts |
Childproof Version Available
Childproof version for iStick Pico 25 with ELLO (2ml) is available for your choice. The button should be pushed in when you slide the mouthpiece back to reveal the fill port to refill.
Childproof version for iStick Pico 25 with ELLO (2ml) is available for your choice. The button should be pushed in when you slide the mouthpiece back to reveal the fill port to refill.
Compact, Stylish and Powerful
With a compact size, the iStick Pico 25 with ELLO is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W.
With a compact size, the iStick Pico 25 with ELLO is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W.
Big 0.91-Inch Screen with Optional Interfaces
The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you're most accustomed to.
High Compatibility
The iStick Pico 25 can handle various
tanks up to 25mm diameter.
The iStick Pico 25 can handle various
tanks up to 25mm diameter.
2A Quick Charge Capability
With a maximum charging current of 2A, the
battery in the iStick Pico 25 can be fully charged
much more quickly.
With a maximum charging current of 2A, the
battery in the iStick Pico 25 can be fully charged
much more quickly.
Replaceable 18650 Battery
The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you.
The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you.
HW Coils for Big Clouds and Optimal Flavor
The iStick Pico 25 comes with the HW coils: HW1 Single-Cylinder 0.2ohm Head and HW2 Dual-Cylinder 0.3ohm Head, providing you with different vaping experience.
Note: All the data above was based on the tests by Eleaf factory. Only for your reference.
The iStick Pico 25 comes with the HW coils: HW1 Single-Cylinder 0.2ohm Head and HW2 Dual-Cylinder 0.3ohm Head, providing you with different vaping experience.
Note: All the data above was based on the tests by Eleaf factory. Only for your reference.
Convenient Retractable Top Fill System
To fill the ELLO tank, you just slide the drip tip back and it reveals the fill port, which is quite easy to use and works very well.
To fill the ELLO tank, you just slide the drip tip back and it reveals the fill port, which is quite easy to use and works very well.
Detachable Structure for Easy Cleaning
All parts of the ELLO tank can be detached and reassembled, allowing great convenience to clean them.
All parts of the ELLO tank can be detached and reassembled, allowing great convenience to clean them.
Upgradeable Firmware with Preheat Function
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest.
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest.
Dual Circuit Protection
The circuit protection system has both software and hardware battery protections of
over-charging, over-current and over-discharging.
over-charging, over-current and over-discharging.
Functions of Micro USB Port
Charging: the 18650 battery can be charged in the iStick Pico 25 through the side USB port via
wall adapter or computer or charged with an external battery charger.
wall adapter or computer or charged with an external battery charger.
Firmware upgrading: the firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
Download the file below to put custom logo into your iStick Pico 25.
